Skip to content
Applying Touch up Paint to your car - Xtremeautoaccessories

Applying Touch up Paint to your car

1. Shake the Paint well before opening (Common Problem)

A nit has been added to the paint to aid mixing (shake for 2 minutes). This is what you will hear in the bottle. Some customers have complained about the colour match, only to find they have not shaken the paint for the required 2 minutes.

2. Clean the area well with the tack clothe supplied

Make sure all dirt, grime & Polishes is removed from the area to be treated.

3. Use the Sandpaper supplied to remove any rust areas

Make sure all dirt, grime & polishes is removed from the area to be treated.

4. Apply the paint with the brush

Do not overload the brush, lights coats are best, and allow 10 minutes drying time between Coats, 2-4 coats can be applied.

5.There is no need for lacquer without formula. 

6. Allow 2 days before you use polish or power washer to wash you car.

7.For best results polish the job 2-3 days after the paint has be applied

 

Previous article How to Apply Touch up Paint to a Car
Next article Applying Aerosol Spray to Car

Leave a comment

Comments must be approved before appearing

* Required fields